+91 97890 53222
sales@chennailabb.com / chennailab@yahoo.com
Working Hours - Mon - Fri: 9:30 AM - 6:30 PM
logo-img

RFI EMC Filters 25 to 200 AMP Chennailabb FCL-11, -110, -14, -140, -1

Home RFI EMC Filters 25 to 200 AMP Chennailabb FCL-11, -110, -14, -140, -1

RFI EMC Filters 25 to 200 AMP Chennailabb FCL-11, -110, -14, -140, -1

The filter herein described shall be designed for filtering of radio frequency interference and to meet the requirements of Military Specifications MIL-F-15733, where applicable. These filters may be used with other electrical devices to enable the devices to meet the requirements of MIL-I-26600, MIL-I-16910. MIL-I- 6181, MIL-I-11748, MIL-STD-461, 462, 463, FED-STD-222 and FCC Specification Part 18. Also, DCA specifications and others developed for special equipment and systems applications

Chennailabb-PART No. Maximum Current Amperes Maximum Line-to-ground Voltage Power Line Frequency (Hz) Dimensions Approx. Wt. (Lbs.)
AC DC A B C
Chennailabb-FCL·14-25 25 277 600 0-60 18 ¼ 4 4 ¼ 13
Chennailabb-FCL·14-50 50 277 600 0-60 18 ¼ 4 4 ¼ 13
Chennailabb-FCL·14-100 100 277 600 0-60 18 ¼ 4 4 ¼ 13
Chennailabb-FCL·14-200 200 277 600 0-60 18 ¼ 4 4 ¼ 13
Chennailabb-FCL·14-25 25 277 600 0-400 18 ¼ 4 4 ¼ 13
Chennailabb-FCL·14-50 50 277 600 0-400 18 ¼ 4 4 ¼ 13
Chennailabb-FCL·140-100 100 277 600 0-400 18 ¼ 4 4 ¼ 13
Chennailabb-PART No. Maximum Current Amperes Maximum Voltage Power Line Frequency (Hz) Dimensions Approx. Wt. (Lbs.)
VAC VDC
Line-to-ground Line-to-ground A B C
Chennailabb-FCL·112·25 25 277 480 800 60 34 4 ¼ 4 ¼ 20
Chennailabb-FCL·112·50 50 277 480 800 60 34 4 ¼ 4 ¼ 25
Chennailabb-FCL·112·10 100 277 480 800 60 40 9 5 30
Chennailabb-FCL·112·15 150 277 480 800 60 40 15 5 ¼ 60
Chennailabb-FCL·112·2O 200 277 480 800 60 40 15 5 ¼ 60

Specifications

GENERAL

The filter herein described shall be designed for filtering of radio frequency interference and to meet the requirements of Military Specifications MIL-F-15733, where applicable. These filters may be used with other electrical devices to enable the devices to meet the requirements of MIL-I-26600, MIL-I-16910. MIL-I- 6181, MIL-I-11748, MIL-STD-461, 462, 463, FED-STD-222 and FCC Specification Part 18. Also, DCA specifications and others developed for special equipment and systems applications

ELECTRICAL
  • CURRENT RATING: The filters shall be capable of withstanding 140% of rated current for 15 minutes without deterioration
  • INSERTION LOSS: The filter shall provide the specified insertion loss of 100 db minimum over its indicated frequency range when measured in accordance with the applicable MIL-STD-220A by a government approved laboratory.
  • VOLTAGE: The filters shall be capable of operating continuously at full- rated voltage and withstanding an initial test of twice the rated voltage for one minute ,
    • MECHANICAL
  • CASE: The filter case shall be made of cold-rolled steel
  • CONSTRUCTION: Input and output terminals shall be completely enclosed in RF shielded compartments. Covers on the input and output RF shielded compartments shall be friction-fitted. Internal components shall be mounted and fixed to prevent damage when subjected to shock and vibration tests.
  • FINISH: All filter cases shall be made corrosion-resistant with suitable lacquer over primer, All unfinished grounding surfaces shall be protected by suitable plating.
  • IMPREGNANT: The impre9nant shall be non-flammable as classified by Underwriters Laboratories.
  • TERMINALS: The terminals shall be made of high temperature alumina ceramic. The ceramic terminal shall have a flexible insulated lead, one end of which is permanently affixed to the terminal, The other end shall be terminated in a permanently affixed lug which shall be mounted on approved flame-retardant insulator.